Twist Mop Velcro - 45 cm - red - 5 pack

Microfibre mop with long piles (8 mm).
- Quick use and short drying time of the floor.
- High-cleaning capabilities.
- Use on non-skid floors because of the high friction.
- No spreading of dirt.
- Quick and easy change due to use of Velcro.
- Loop for removal of the mop.

Instructions

1. Wash the mop in the washing machine before the first use.
2. Place the mop on the mop holder.
3. Remove mop after each use.
4. Wash in the washing machine before next use.

Specifications

Quantity per packing: 10 parcels Dimensions: 46 x 14 x 8 cm Weight: 630 g

  • How to impregnate microfibre mops (45 cm)?

    Use 4 to 5 litres of water for 15 mops. Fold the mops in half (microfibre on the inside), place the mops in a tray with the narrow side at the bottom and the loop at the top. Add 4 to 5 litres of water (with detergent). Allow the mops to absorb the moisture. Move the first 2 mops backwards to distribute the moisture evenly. The mops are now damp for optimal use.

    Click here for more information
    impregnate, moisten, mop
  • How to optimise the washing process?

    Read the washing instructions found on the label or the technical data sheet. Avoid using washing powder; use a liquid detergent instead. Do not use detergents that contain bleach or optical brighteners. Do not use detergents with a pH higher than 10. It is better to wash microfibre products with other microfibre products only. It is better to wash the mops and the cloths separately. Before washing, rinse the mops and cloths with plenty of water. This removes any residual cleaning agents from the microfibres. Select a washing programme with a limited washing cycle. In order to ensure a long life span, we recommend avoiding mechanical drying as much as possible.

    washing process, washing, laundry, washing instructions, microfibre mop

Microfibre mop with long piles (8 mm).
- Quick use and short drying time of the floor.
- High-cleaning capabilities.
- Use on non-skid floors because of the high friction.
- No spreading of dirt.
- Quick and easy change due to use of Velcro.
- Loop for removal of the mop.

Instructions

1. Wash the mop in the washing machine before the first use.
2. Place the mop on the mop holder.
3. Remove mop after each use.
4. Wash in the washing machine before next use.

Specifications

Quantity per packing: 10 parcels Dimensions: 46 x 14 x 8 cm Weight: 630 g

Where to buy

  • How to impregnate microfibre mops (45 cm)?

    Use 4 to 5 litres of water for 15 mops. Fold the mops in half (microfibre on the inside), place the mops in a tray with the narrow side at the bottom and the loop at the top. Add 4 to 5 litres of water (with detergent). Allow the mops to absorb the moisture. Move the first 2 mops backwards to distribute the moisture evenly. The mops are now damp for optimal use.

    Click here for more information

    impregnate, moisten, mop
  • How to optimise the washing process?

    Read the washing instructions found on the label or the technical data sheet. Avoid using washing powder; use a liquid detergent instead. Do not use detergents that contain bleach or optical brighteners. Do not use detergents with a pH higher than 10. It is better to wash microfibre products with other microfibre products only. It is better to wash the mops and the cloths separately. Before washing, rinse the mops and cloths with plenty of water. This removes any residual cleaning agents from the microfibres. Select a washing programme with a limited washing cycle. In order to ensure a long life span, we recommend avoiding mechanical drying as much as possible.

    washing process, washing, laundry, washing instructions, microfibre mop